During long winters, when many of us are stuck at home and have not left our houses, we get a bit antsy and ready to enjoy the outdoors as spring approaches. Are you looking for something fun and exciting to do in your very own backyard? Want to spruce it up so you can enjoy the ambiance? We have a great idea in store for you—flower pot fountains.
DIY Water Garden
Water gardens give your yard a touch of style and ambiance. Would you like to install a water feature but struggle with digging a pond or installing complicated pipes and pumps? Flower pot fountains are an easier option that still gives you the delightful sights and sounds of running water.
Flower Pot Fountains
Do you have large flower pots cluttering up your garden shed or garage? Maybe you had plans for a planter garden on your deck or patio but never got around to buying potting soil or choosing plants. Those flower pots can become a fun and attractive water fountain garden for your deck, patio, or any garden you like. The flower pot fountains process is quite simple and affordable.
Material List for a Flower Pot Fountain
Find or buy at least two large flower pots or tubs for your fountain. The largest must be adequate to hold all the water and an electric fountain pump. Choose flower pots with holes in the bottom.
Get two sturdy plastic mesh baskets or flower pots that fit comfortably inside the two pots. These can be found at garden supply stores or shops that sell aquatic plants. You could also use plastic flower pots smaller than the two mentioned above, but you must cut holes in them so the water flows freely.
Buy a water pump designed specifically for small-scale fountains. If it is too powerful, the water will spray outside the flower pots. If it is too weak, you will not get a pleasant flow. Ones with the ability to adjust flow are ideal. Waterproof adhesive or silicon sealant can help make the fountain more stable or last longer, but they are not needed.
Step-by-Step Flower Pot Fountain Setup and Construction
Before gathering materials or building the fountain, decide where it will sit for a long time. You need an outdoor location that is flat and hard, has easy access to an electrical outlet for the pump, and does not block pathways or garden plants from growing. Flowerpot fountains are heavy, which makes them difficult to move after they are set up. Draining the water completely to carry them to a new spot can also be a challenge.
Plug any holes in the largest flower pot and place it in its final position. Buying a pot without holes is ideal, but they can be closed relatively easily with a combination of flat rock, plastic sheet, or other sturdy, water-safe material and sealant.
Next, position the fountain pump in the center of the bottom of the largest flower pot. The water intake must be free of obstructions. Most pumps have a guard or filter over the intake to prevent leaves and other debris from getting inside the mechanism. If yours does not, buy one or fabricate one from a strainer or other materials.
The water outlet tube should point straight up. If necessary, use some small rocks to help it maintain its position. The large plastic basket comes next. Slide the pump’s outlet tube through the top space in the basket and push it all the way down until it rests flat on the bottom of the large flower pot.
Then, place the next smallest flower pot on top of the plastic basket, with the outlet tube coming up through the hole in its bottom. Use a sealant to ensure a tight fit between the tube and the hole so water does not flow back down through the middle.
Repeat these steps until you have your neat and sturdy stack of three flower pots of graduated sizes. This is the perfect time to seal any holes or gaps or use the sealant to attach the pots securely to each other if desired.
If desired, you can tuck decorative stones or even clean pots of aquatic plants around the edges of the flower pots. Remember that most water-loving plants need sunlight and room to grow, so only very small types would work in a flower pot fountain.
Two Types of Backyard Flower Pot Fountains
The most common type of flower pot fountain created this way uses a large pot to hold and catch all the water. The water flows gently over the edges and cascades downward. In other words, the water slowly fills the top pot, then runs smoothly over the edge of that pot into the pot below, and so on.
If you want this type of fountain, cut the water outlet tube off well below the rim of the top pot. You will get a gentle flow if you do not buy a pump with too much power. If you cut it off closer to the top of the water, the force will push up higher and create agitation on the top of the water. It is your choice which way you like the best.
The other option is to attach a fountainhead to the top of the water outlet tube. The most important thing to remember is that the water still has to get into the largest flower pot at the bottom. You cannot put a true fountain or sprayer at the top and expect to keep your water contained.
However, small and gentle fountain attachments will create an arch or mound of water to add more visual and aural interest to the fountain. There are also ones that will shoot the water straight up and let it cascade down upon itself. If you choose any of these, pay close attention to the overall water level of the fountain. These encourage more evaporation, and you must refill the flower pots more frequently.
Enjoy Your Amazing Flower Pot Fountains
It is time to enjoy your DIY flower pot fountains on the back patio, deck, or in the garden. Fill the largest flower pot on the bottom with water from the hose and turn on the pump. As the water is sucked upward, continue filling the bottom part until all the pots are full and the water is flowing freely.
The sights and sounds of a water garden do not require back-breaking labor or disruption of your whole yard. With some large flower pots and a small motor, you can create your own fountain, perfect for your deck or patio. With just a few hours’ work, you can experience more beauty, relaxation, and interest in your landscaping scheme.
Fernandez and Sons Masonry and Landscaping hope you enjoyed reading our blog, “DIY Flower Pot Fountains, Build a Fun Water Garden.” Our passion is to make backyards both enjoyable and beautiful by designing incredible outdoor spaces, which include masonry or landscaping.
If you would like to enhance your flower pot fountains within your water garden, get in touch with us. Let us show you what we can design in the surrounding areas or even how to transform your entire backyard. We would love to speak with you.